Return to
Other Models in this category:
Two Stall Enginehouse
|
DD1017
|
Two Stall Enginehouse
|
|
|
SCALE: HO (1:87.1)
FOOTPRINT: 6" x 12"
$89.95
Limited Edition
500 Kits
OUT OF PRODUCTION
(Call for Availability)
|
Description
|
It's finally here!
Over two years in planning and design, the beautiful castings were designed and carved especially for this project - one brick, one stone, one section at a time. Even though this kit features modular construction (so it can be made deeper or shorter as needed), each of the sections is unique unto itself, so that you won't find the patterns (of worn, missing or damaged brick or stone) repeating themselves. The kit also features laser cut wood parts (the windows, doors and all wood siding), precut Evergreen Styrene and Mount Albert Scale Lumber and a brand new set of painting instructions written especially for this kit. This special kit will be run in just very limited numbers and will not be re-run whne sold out.
|
Construction Method
|
Cast Hydrocal plaster walls, laser cut wood door & windows.
|
Construction Time
|
Modelers of average skill should be able to finish this kit in just a few evenings. Easy to understand step by step instructions are provided to walk you through each step of construction, from gluing the kit together to final painting and aging.
|
Tools Required
|
Hobby knife, sanding block, 5 minute epoxy, super glue, paint brushes.
|
Finishing
|
Flat white spray paint (to seal the castings) and water based artists acrylics.
|
This site and its contents are Copyright © 2000-2008 by Downtown Deco, except as noted.
|